COROSAN® Metal Primer is a special water based with a solidified metal surfaces to effect priming. Its adhesiveness is extreme and can be applied to any metal surface before painting.
Clean dirt from the support that should be treated grease and stains.
150-200 ml per m2.
3 to 5 hours at 20 ° C and 65% RH. Low temperatures and high humidity extend the drying time.
10 Litre Pots (40 Pots per pallet)
Apply COROSAN® Metal Primer with an Airless-spryer. The ambient temperature must not be less than 5° C. Allow to dry completely. Once dry make sure that no glossy film exists.
Note: Components not to be treated should be protected against splashing, as COROSAN® Metal Primer is very difficult to remove. Now the surface is ready for the application of COROSAN® Top Coat.